Gold Rod Display Shelf Fittings Kit - Create Suspended Glass & Wood Shelving Units (Shelf Boards Not Included)

The Gold Rod Display Shelf Fittings Kit combines a high-quality rod display system with single-sided shelf supports to create an elegant glass or wooden shelving unit, suspended on vertical rods fixed to the ceiling & floor. The rod system uses 6mm round rods, and by attaching the shelf supports, you can create dynamic suspended shelving units that are ideal for retail product displays, home entertainment equipment, and more!

These shelving units install directly between the ceiling & floor, so they are not limited to just wall spaces, making them suitable for open spaces. This design is perfect for shop floors and window displays, allowing customers to view and access products from both sides of the unit. These shelf units are great for creating shelving solutions in homes, too!

The single-sided supports come with a horizontal grip clamp that easily attaches to the edge of the shelf board. They are suitable for shelf boards and solid materials up to 10mm thick. The supports feature rubber-tipped bolts that do not damage board surfaces and are available in a premium gold-colour finish.

• The kit includes a complete set of fittings only - shelf boards not included!
• The supports are only compatible with TOUGHENED GLASS and hard wooden shelving!
• At least (4) supports are required per shelf board!

Complete suspended rod shelf kits - include:

• 1 shelf rod kit: (4) ceiling-to-floor fittings with 1.5m rods, (4) shelf supports
• 2 shelves rod kit: (4) ceiling-to-floor fittings with 1.5m rods, (8) shelf supports
• 3 shelves rod kit: (4) ceiling-to-floor fittings with 1.5m rods, (12) shelf supports
• 4 shelves rod kit: (4) ceiling-to-floor fittings with 1.5m rods, (16) shelf supports
• All shelf kits include screws & plugs for installing the rod system.

Ceiling-to-floor rod display - installation:

1. Separate the ceiling & floor fittings from the brass screw mounts concealed inside
2. Screw the first brass mount into the top/ceiling, and reattach the top cap
3. Making sure it's aligned, do the same for the floor fitting, but do not reattach its top
4. Measure and cut the rod to size, making sure the male-screw thread is on the length you are using
5. The ceiling fitting's hole has a screw thread inside, screw your rod into this hole using it's male-screw thread
6. Pass the free end of the rod through the floor fixings' top, and reattach it to the screw mount fixed to the floor