Ceiling to Wall White Cable Fitting, 4m Length

Ceiling to Wall White Fitting is the ideal poster display solution & alternative to the standard 'Ceiling to Floor' white cable display system - when you are unable to screw cables into the floor! A modern, fully adjustable display system for Acrylic Panels, Posters, Frames, Unframed Pictures, Photographs, and more!

Ceiling to Wall White Cable Fitting - Installation

1. Unscrew the ceiling fixture into (2) pieces (1 'Brass Mount' and 1 'White Cap with Cable'.
2. Install the 'Brass Mount' to the ceiling.
3. Now screw the polished 'White Cap with Cable' back onto the Brass Mount.
4. Unscrew the wall fitting into (2) pieces (1 'Wall Mount' and 1 'White Cover')
5. Measure, align and install the 'Wall Mount' at what will be the bottom of your display.
6. Once screwed to the wall, add the 'White Cover' and make sure the 'cable hole' is facing upwards with the 'Grub Screw' located on the side!
7. Take the hanging cable, thread it through the 'cable hole' of the wall fitting, and tighten the 'Grub Screw' on the side of the 'White Cover'.
8. Any access cable that protrudes from the bottom - cut to make a neat finish!

Note: Fittings can also be supplied with "Transparent" Perlon Cord! (On request)